What is ISO 12151-6 and what is the latest version?
The title of ISO 12151-6 is connections for hydraulic fluid power and general use — hose fittings —part 6: Hose fittings with ISO 8434-6 60°cone ends
The first edition was released in 2009 and prepared by Technical Committee ISO/TC 131, Fluid power systems, Subcommittee SC 4, connectors and similar products and components.
Current valid version is ISO 12151-6:2009, see below the cover page of ISO 12151-6 standard, and link from ISO website.
https://www.iso.org/search.html?q=ISO%2012151-6&hPP=10&idx=all_en&p=0
ISO 12151-6 evolved from BS5200 (issued in 1975) 60°cone hose fittings, and widely used in Europe.
What content does ISO 12151-6 specify?
ISO 12151-6 specifies the general and dimensional requirements for the design and performance of hose fittings made of carbon steel with 60°cone ends for norminal hose inside diameters of 5 mm to 51 mm inclusive, in accordance with ISO 4397.
If you want materials other than carbon steel, it is fine and please inquire our customer service.
Does Winner have compatible product for ISO 12151-6?
Winner call this type hose fitting as BSP 60°cone hose fitting, and male fitting series part no. is 126xx and female series is 226xx. Below is some typical picture for these series.
126xx series typical type
226xx series typical type
Winner BSP 60°cone hose fitting has different contour, such as with or without O-ring, with or without hex for female fitting, different drop length for bending hose fitting, detail see catalogue sheet for customer choice.
[Link to Download catalogue]
Winner BSP 60°cone fitting portion of a hose assembly tested in accordance with ISO 19879, and complete hose assembly tested in accordance with ISO 6605.
The finish requirement in the ISO 12151-6 is 72 h neutral salt-spray test in accordance with ISO 9227 and no red rust, Winner parts far exceed the ISO 12151-6 requirement.
Below is ISO specification and Winner salt spray test picture.
Post time: Feb-07-2022