The Application of ISO 8434-2 Connectors

How work and connect in hydraulic fluid power system?

In fluid power systems, power is transmitted and controlled through a fluid (liquid or gas) under pressure within an enclosed circuit. In general applications, a fluid may be conveyed under pressure.

Components may be connected through their ports by connectors and conductors (tubes and hoses). Tubes are rigid conductors; hoses are flexible conductors.

What use for ISO 8434-2 37°flared JIC connectors?

ISO 8434-2 37°flared JIC connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in standard, but Winner JIC connectors have a higher pressure than specified in ISO 8434-2.

37°flared JIC connectors are intended for the connection of tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1, ISO 9974-1 and ISO 11926-1. (See ISO 12151-5 for a related hose fitting specification.)

What is the typical connection?

Below is the typical example of a ISO 8434-2 37°flared connection.

e71789384

Figure 1 – Typical 37°flared connection

Key

1 straight stud connector body
2 tube nut
3 tube
4 sleeve
5 O-ring

a Stud end in accordance with ISO 1179-3, ISO 6149-3, ISO 9974-2 or ISO 11926-3

What need pay attention when install 37°flared JIC connectors ?

When install the 37°flared JIC connectors to other connectors or tubes shall be carried out without external loads, and tighten the connectors as the number of wrenching turns or assembly torque.

Where will use 37°flared JIC connectors ?

37°flared JIC connectors widely used in American, utilized in hydraulic systems on mobile and stationary equipment sch as agricultural machine, construction machinery, etc.


Post time: Feb-07-2022